Forumul Cetatenie-Romana.info
Welcome Guest! To enable all features please Intrare or Inregistrare.

Notificare

Icon
Error

Share
Optiuni
Ultima postare. Go to first unread
Offline gabrielantonio  
#1 Postat : vineri, 6 aprilie 2018 13:26:56(UTC)
Nivel: Incepator
gabrielantonio
Postari: 1
Reputation:

Locatia: london
Hello,

I have tried several files and both printing through USB and with SD card. The prints begin with the printer moving to about the center of the X axis. Then the printer proceeds to print a line with a length of 2-4 inches. The Y axis moves no more than 1/8 of an inch and probably less for the Z axis. The result is that the print nozzle ends up dragging through the plastic that is being laid down and pulling it off the glass. I can pull that clear and it continues to lay down layers that stick to the bed because the Z axis is hardly raised. My printer is a Creality CR-10S. I do not think that the problem is in the printer. I just got this yesterday and was not able to find the rabbit that was supposed to be printed, but did have another part of some sort that was on the supplied SD card that I printed with no problem.

Please help.

I didn't find the right solution from the Internet.

References:-
https://forum.simplify3d...topic.php?f=9&t=9250
Motion Graphics Intro Examples

Thanks
Utilizatori pe tema
Salt la forum  
NU poti posta noi teme in acest forum.
NU poti raspunde la teme in acest forum.
NU poti sterge postari la acest forum.
Nu poti edita postari la acest forum.
Nu poti crea sondaje in acest forum.
Poti vota la sondaj in acest forum.